Skip to main content

RCF MATRIX AMPLIFIERS

RCF Matrix Amplifiers are compact class-D amplifiers equipped with a powerful DSP platform and remote control, ideal for a wide range of install applications.

Close up of the RCF DMA 504 matrix amplifier front panel control wheel.

Easy and flexible configuration

The configuration is a key point for the success of sound reinforcement systems: it’s easy and flexible for any kind of user, from the less to the more skilled one. DMA amplifiers offer different configuration levels, from user-friendly front panel control interface to RDNet, for large and complex systems.

Presets for RCF speakers are available on each channel for optimal acoustic performance and reliability. It can distribute 4 audio channels to other units through an analog audio BUS, combining a flexible and scalable multi-room architecture with an easy connection and installation. Configuration is simple and user-friendly and can be carried out through either the front panel controls (with OLED display) or RDNet. Thanks to its installation flexibility, accurate design, and robustness, DMA 504 is ideal for a wide range of business music and installed sound applications.

Robust and Attractive Design

Thanks to their attractive design, extremely compact size and environmental robustness, DMA represent a junction point between professional and consumer markets.

Full on-board processing

Equipped with a powerful DSP platform, RCF DMA units integrate RCF advanced proprietary technologies, conceived to optimise speaker performance:

  • FiRPHASE – FiR filtering technology
  • BASS ENHANCER – a sophisticated algorithm that increases low frequencies perception.

Speakers Presets

Processing functions are combined in a highly distinctive feature, SPEAKERS PRESETS, pre-loaded equalisation packages optimising the performance of any RCF speaker. Just select the speakers connected to the amplifier to automatically get the right RCF signature sound.

RCF RDNet

Networked Control and Much More

RDNet is a robust management network and control platform for small, medium and large arena-sized sound systems, as well as complex and extended installations. Based on a proprietary network protocol, RDNet provides intuitive control and monitoring of every connected device/object in the RCF audio system. Each device has DSP to address specific presets or modifications of parameters to single or groups of objects. A network user can change level, delay, EQ (linear phase FiR as well) and other settings, including advanced subwoofer configurations. RDNet is not only designed for loudspeakers—you can control parameters and routing of multiple RCF devices, such as digital matrixes or amplifiers.

Read More

Scalable Architecture

To fit with any installation need, DMA amplifiers have been designed with a highly scalable architecture and each device can distribute 4 audio channels to satellite units. This allows increasing installed power and creating a multi-room architecture. The connection can be done with just 1 CAT5e cable. Each satellite unit can be differently set using the DIP-SWITCH on the rear panel to receive the desired channels.

RCF DMA Connect App Icon.

DMA CONNECT APP

The DMA Connect app provides wireless control of RCF DMA Series Business Music amplifiers. With its functionality and user-friendly interface, it allows access to DMA settings such as: input and output levels, equalizers, routing, speaker preset selection, device information, and real-time VU-meters. Advanced settings for expert users are also available, including customizable names for input, outputs, and devices.

BT Board for RCF Matrix Amplifiers

The DMA Connect app requires the BT Board DMA. An optional Bluetooth board designed to work seamlessly with the DMA Matrix Amplifiers.

Close up of the RCF DMA 504 BT board.

Speak to an Music Gear Installations Audio Visual Expert

RCF DMA 504

Four Channel Matrix Amplifier

The DMA 504 is a four-channel Class-D matrix amplifier providing 4 power outputs of 500 Watts each. Equipped with a powerful DSP platform, inputs and outputs can be managed in terms of routing and equalisation. The complete set of processing functions includes PEQ, FIR filters, bass enhancement, limiters, compressors, and environmental equalisation.

View Install ProjectsI Have More Questions
RCF DMA 504 Matrix Amplifier
Close up of the RCF DMA 504 matrix amplifier front panel control wheel.

DMA 504 Features

  • 4 x 500 W Class-D power amplifier
  • 20 ÷ 20000 Hz frequency range
  • Full on-board processing
  • RCF speakers’ presets
  • Proprietary bass enhancer algorithm
  • FiRPHASE linear phase filters
  • Flexible and scalable multi-room architecture
  • RDNet for networked management
  • Remote controls and paging console accessories

Presets for RCF speakers are available on each channel for optimal acoustic performance and reliability. It can distribute 4 audio channels to other units through an analog audio BUS, combining a flexible and scalable multi-room architecture with an easy connection and installation. Configuration is simple and user-friendly and can be carried out through either the front panel controls (with OLED display) or RDNet. Thanks to its installation flexibility, accurate design, and robustness, DMA 504 is ideal for a wide range of business music and installed sound applications.

DMA 504 Technical Specs

4 x 500 watts at 4 OHM OR 2 x 1000 watts hi-Z

Inputs

  • 2 x LINE STEREO (RCA) (1 alternative to AUX IN on the front panel)
  • 1 x MIC/LINE balanced (removable terminal)
  • 1 x PAGING (RJ 45)

Outputs (signal)

  • 1 x STEREO LINE/SUB (RCA)
  • 1 x 4 CHANNELS AUDIO BUS (RJ 45)

Controls

  • 1 x REMOTE MUTE CONTACT
  • 4 x WALL MOUNT REMOTE CONTROLS
  • 1 x CTRL + FIRMWARE UPDATE USB PORT
RCF DMA 82 Matrix Amplifier

RCF DMA 82

Two Channel Matrix Amplifier

The RCF DMA 82 is a two-channel class-D matrix amplifiers equipped with a powerful DSP platform, allowing managing inputs and outputs in terms of routing and equalisation (a complete set of processing functions is available, including PEQ, FIR filters, bass enhancement, limiters, compressors and environmental equalisation); moreover, dedicated presets for RCF speakers have been implemented to optimise their acoustic performance.

View Install ProjectsI Have More Questions

DMA 82 Features

  • 2 x 80 W Class-D power amplifier
  • 20 ÷ 20000 Hz frequency range
  • Full on-board processing
  • RCF speakers’ presets
  • Proprietary bass enhancer algorithm
  • FiRPHASE linear phase filters
  • Flexible and scalable multi-room architecture
  • Suitable for desktop or rack installation
  • RDNet ready for networked management
  • Remote controls and paging console accessories

It can distribute 4 audio channels to DMA 162P units through an analogue audio BUS, combining a flexible and scalable multi-room architecture with an easy connection and installation. Its configuration is simple and user friendly and can be carried out through either its front panel controls (with OLED display) or RDNet. Thanks to its installation flexibility, accurate design, and robustness, it is ideal for a wide range of business music and installed sound applications.

Close up of the RCF DMA 504 matrix amplifier front panel control wheel.

DMA 82 Technical Specs

2 x 80 watts at 4 OHM OR 160 watts hi-Z

Inputs

  • 2 x LINE STEREO (RCA)
    (1 alternative to AUX IN on the front panel)
  • 1 x MIC/LINE balanced (removable terminal)
  • 1 x PAGING (RJ 45)

Outputs (signal)

  • 1 x STEREO LINE/SUB (RCA)
  • 1 x 4 CHANNELS AUDIO BUS (RJ 45)

Controls

  • 1 x REMOTE MUTE CONTACT
  • 2 x WALL MOUNT REMOTE CONTROLS
  • 1 x CTRL + FIRMWARE UPDATE USB PORT

RCF DMA 162

Two Channel Matrix Amplifier

The RCF DMA 162 is a two-channel class-D matrix amplifiers equipped with a powerful DSP platform, allowing managing inputs and outputs in terms of routing and equalisation (a complete set of processing functions is available, including PEQ, FIR filters, bass enhancement, limiters, compressors and environmental equalisation); moreover, dedicated presets for RCF speakers have been implemented to optimise their acoustic performance. It can distribute 4 audio channels to DMA 162P units through an analogue audio BUS, combining a flexible and scalable multi-room architecture with an easy connection and installation. Its configuration is simple and user friendly and can be carried out through either its front panel controls (with OLED display) or RDNet. Thanks to its installation flexibility, accurate design, and robustness, it is ideal for a wide range of business music and installed sound applications.

View Install ProjectsI Have More Questions
RCF DMA 82 Matrix Amplifier

DMA 162 Features

  • 2 x 160 W Class-D power amplifier
  • 20 ÷ 20000 Hz frequency range
  • Full on-board processing
  • RCF speakers’ presets
  • Proprietary bass enhancer algorithm
  • FiRPHASE linear phase filters
  • Flexible and scalable multi-room architecture
  • Suitable for desktop or rack installation
  • RDNet ready for networked management
  • Remote controls and paging console accessories
RCF DMA 162 back panel.

DMA 162 Technical Specs

2 x 160 watts at 4 OHM OR 320 watts hi-Z

Inputs

  • 2 x LINE STEREO( RCA)
    (1 alternative to AUX IN on the front panel)
  • 1 x MIC/LINE balanced (removable terminal)
  • 1 x PAGING (RJ 45)

Outputs (signal)

  • 1 x STEREO LINE/SUB (RCA)
  • 1 x 4 CHANNELS AUDIO BUS (RJ 45)

Controls

  • 1 x REMOTE MUTE CONTACT
  • 2 x WALL MOUNT REMOTE CONTROLS
  • 1 x CTRL + FIRMWARE UPDATE USB PORT
RCF DMA 162P power amplifier.

RCF DMA 162P

Two Channel Power Amplifier

DMA 162P is a two channels Class-D power amplifier, equipped with a powerful DSP platform. Its natural use is in combination with a DMA unit, in order to increase installed power and implement multi-room architectures for Commercial Audio systems. However, its adaptability, control tools, and available inputs allow using it as a stand-alone amplifier: in fact, adding the optional RDNet board the user can manage all DSP functions and choose the specific RCF speakers preset. Thanks to the extremely compact size, accurate design, and robustness, it is ideal for a wide range of business music applications.

View Install ProjectsI Have More Questions

DMA 162P Features

  • 2 x 160 W Class-D power amplifier
  • 20 ÷ 20000 Hz frequency range
  • Full on-board processing
  • RCF speakers’ presets
  • Proprietary bass enhancer algorithm
  • FiRPHASE linear phase filters
  • Flexible and scalable multi-room architecture
  • Suitable for desktop or rack installation
  • RDNet ready for networked management
RCF DMA 162P back panel.

DMA 162P Technical Specs

2 x 160 watts at 4 OHM OR 320 watts hi-Z

Inputs

  • 1 x 4 CHANNELS BUS (RJ 45)
  • 1 x LINE STEREO (RCA)
    alternative to AUX IN on the front panel

Outputs (signal)

  • 1 x 4 CHANNELS AUDIO BUS (RJ 45)
  • 1 x STEREO LINE/SUB (RCA)

Controls

  • POWER OUTPUTS GAINS
  • 1 x REMOTE MUTE CONTACT
  • 1 x BUS/LOCAL IN SELECTION CONTACT
  • 1 x RDNet IN/OUT (optional board)

Speak to an Music Gear Installations Audio Visual Expert